自动上料混凝土搅拌车的操作要稳重

来源://www.scritchies.com日期:2021-06-07 发布人:admin
一轻:自动上料混凝土搅拌车工作时,卡车脚跟应靠近驾驶室地板,脚板应与油门踏板平行,并轻轻踩下燃油踏板。
One light: when the automatic feeding concrete mixer works, the heel of the truck should be close to the floor of the cab, the foot board should be parallel to the accelerator pedal, and the fuel pedal should be gently stepped down.
二稳:在自动上料混凝土搅拌车的运行中,节流阀应始终保持稳定。一般来说,节气门开度在百分之七十左右。
Two stable: in the operation of automatic feeding concrete mixer, the throttle valve should always be stable. Generally speaking, the throttle opening is about 70%.
三离:自动上料混凝土搅拌车工作时,脚踏板应与制动踏板分离,平放在驾驶室地板上。切勿踩下制动踏板。搅拌车经常在路面不平的工地上工作。如果脚一直踩在制动踏板上,车身会上下移动,会导致驾驶员不小心踩下制动踏板。一般来说,我们应该通过控制油门减速来控制发动机状况和换挡。这不仅避免了频繁制动引起的制动系统过热,也为自动上料混凝土搅拌车的快速提速带来了方便。
自动上料混凝土搅拌车
Three separation: when the automatic feeding concrete mixer works, the pedal shall be separated from the brake pedal and placed on the floor of the cab. Do not depress the brake pedal. Mixer truck often works on the construction site with uneven road surface. If the foot is always on the brake pedal, the body will move up and down, which will cause the driver to accidentally press the brake pedal. Generally speaking, we should control the engine condition and shift by controlling the throttle deceleration. This not only avoids the overheat of the brake system caused by frequent braking, but also brings convenience to the rapid speed up of the automatic feeding concrete mixer.
四勤:特别是铲挖作业时,在油门稳定的情况下,通过拉动提升和旋转操纵杆,以一个循环的方式将铲斗装满物料。提升和铲斗转动操纵杆的循环拉动称为“勤勉”。这一过程非常重要,对油耗影响很大。
Fourth duty: especially in shovel digging, when the throttle is stable, the bucket is filled with materials in a cycle by pulling the lifting and rotating control lever. The cyclic pull of the lift and bucket rotation levers is called diligence. This process is very important and has a great impact on fuel consumption.
五协调:协调是提升和铲斗操纵杆的配合。自动上料混凝土搅拌车的一般铲挖过程是将铲斗放在地面上,平稳地打入桩体。斗与料堆平行铲料时,应遵循先提臂后收斗的原则。这样可以合理避免铲斗底部的阻力,从而充分发挥较大挖掘力。
Five coordination: coordination is the coordination of lifting and bucket control lever. The general shovel excavation process of automatic feeding concrete mixer is to place the bucket on the ground and drive into the pile body smoothly. When the bucket is parallel to the material pile, the principle of lifting the arm first and then retracting the bucket should be followed. This can reasonably avoid the resistance at the bottom of the bucket, so as to give full play to the larger excavation force.
六严禁:,严禁轮胎打滑。自动上料混凝土搅拌车在工作时,遇到阻力和猛烈时,经常在加油口门处出现轮胎打滑现象。这种现象通常是由于驾驶员操作不当造成的,增加了油耗,损坏了轮胎。其次,后轮严禁翘曲。由于自动上料混凝土搅拌车挖掘力大,司机通常会挖掘坚硬的原土和石山,如果操作不当,两个后轮很容易升起离开地面。
Six prohibitions: first of all, it is strictly forbidden to skid the tires. When the truck is working, the tire slip often occurs at the door of the filler when it encounters resistance and violence. This phenomenon is usually caused by improper operation of the driver, which increases fuel consumption and damages the tires. Second, the rear wheels are strictly forbidden to warping. Because of the high excavation force of the automatic loading concrete mixer, drivers usually dig hard raw soil and stone mountain. If the operation is not correct, the two rear wheels are easy to rise and leave the ground.
本文来自: 自动上料混凝土搅拌车更多的内容请点击: //www.scritchies.com我们将会为您提问的问题提供一个满意的服务,欢迎您的来电!
This article is from: automatic feeding concrete mixer. For more information, please click: //www.scritchies.com We will provide a satisfactory service for your questions, welcome your call!