自上料搅拌车出现打齿的现象的原因

来源://www.scritchies.com日期:2022-04-06 发布人:admin
搅拌斗装载机不能行走的情况想必大家也有遇到过,不能正常行走,肯定就会影响正常的工作,但是,大家也不要惊慌,要找出原因,排查故障。
We must have encountered the situation that the mixing bucket loader can't walk. If it can't walk normally, it will certainly affect the normal work. However, don't panic, find out the cause and troubleshoot.
1.检查变速箱的油量限位阀、变速压力表,如果发现缺少变速变距油应该添加新油,但不能添加太多,否则会导致变速箱出现发热的情况,通常情况下添加到限位阀流出油即可。
1. Check the oil quantity limit valve and transmission pressure gauge of the transmission. If it is found that there is a lack of transmission variable distance oil, add new oil, but do not add too much, otherwise the transmission will be heated. Usually, add the oil flowing out of the limit valve.
2.检查动臂能否起落、有没有转向,若动臂可起、可落,还可以完成转向动作,但是机械本身无法实现行走的过程。这主要是因为变速泵的损坏缺油水而导致的。
2. Check whether the boom can rise and fall and whether there is steering. If the boom can rise and fall, it can also complete the steering action, but the machine itself cannot realize the process of walking. This is mainly caused by the damage and lack of oil and water of the variable speed pump.
3.若动臂不能进行升降起落,也无法实现转向动作,且本身也不可实现行走。这种情况大多数是由于搅拌斗变速器的钢板链接被螺栓剪断、弹性板破裂导致的。将柴油机、变速箱一起吊出,拆除变矩器柴油机的连接位置,并检查出损坏位置,更换并修好零件即可。
3. If the boom cannot rise and fall, it cannot realize steering action, and it cannot realize walking itself. This situation is mostly caused by the steel plate link of the mixing bucket transmission being cut off by bolts and the elastic plate being broken. Lift out the diesel engine and gearbox together, remove the connection position of the torque converter diesel engine, check the damaged position, and replace and repair the parts.
搅拌车厂家提醒大家,无论任何设备遇到故障,都要认真对待,找到问题的根源,从而找到相应的方法。
The mixer truck manufacturer reminds everyone that no matter any equipment fails, they should take it seriously and find the root of the problem, so as to find the corresponding solutions.
自上料搅拌车是一种工程机械,齿轮是其组成零部件之一。齿轮能够转动就是因为上齿轮和下齿轮之间要形成一对良好的传动关系,只有两者之间的衔接到位了,所以它的运行才能是一个平稳的关系。而打齿其实就是两个金属质地的齿轮之间的硬碰硬,导致齿轮的齿冠部分磨损会更快,时间长了、次数多了,本来直角的齿冠就会被磨成圆角,入挡之后咬合就会出现问题,稍微震动很容易就出现掉挡现象。那么,您知道为什么搅拌斗会出现打齿的情况吗?
Self loading mixer is a kind of engineering machinery, and gear is one of its components. The reason why the gear can rotate is that a pair of good transmission relationship should be formed between the upper gear and the lower gear. Only when the connection between the two is in place, can its operation be a stable relationship. In fact, tooth beating is the hard collision between two metal gears, resulting in faster wear of the crown of the gear. With a long time and more times, the crown of the original right angle will be ground into a fillet. After entering the gear, there will be problems in the bite, and it is easy to fall out of the gear when it vibrates a little. Then, do you know why the mixing bucket has teeth beating?
正常情况来说,车辆中都会有同步器存在,它的作用便是高转速齿轮与即将进入到当时档位齿轮同步的部件。咱们都知道在倒挡情况下,产生打齿现象的次数反而会增加,这首要由于在搅拌斗中没能安装同步器,因此在停止的状态下,齿轮之间的差速器就会随之变小,这样倒挡就会比较顺利。搅拌斗出现打齿问题除了螺旋伞齿、啮合副本身质量、调整间隙不正确以外,不正确的操作流程是导致搅拌斗出现打齿问题的首要原因。
Normally, there will be synchronizer in the vehicle. Its function is to synchronize the high-speed gear with the gear that is about to enter the current gear. When the differential gear is installed, the number of reverse gears will increase. Therefore, when the differential gear is not installed, the reverse gear will change smoothly. In this way, the reverse gear will occur. In addition to the incorrect quality of spiral bevel gear, meshing pair and adjustment clearance, the incorrect operation process is the primary reason for the toothing problem of the mixing bucket.
以上就是为大家介绍的有关 江南app平台官网 车的详细介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务 //www.scritchies.com/
The above is a detailed introduction to the self loading concrete mixing tank truck. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service //www.scritchies.com/