搅拌车正确清洗步骤：
Correct cleaning steps of mixer truck:
由于混凝土会在短时间内凝固成硬块，且对挖机搅拌车的钢材和油漆有一定的腐蚀性，所以每次使用混凝土贮罐后，洗净粘附在混凝土贮罐及进出料口上的混凝土是每日维护一定要认真进行的工作。其中包括：
As the concrete will solidify into hard blocks in a short time, and has a certain corrosivity to the steel and paint of the excavator mixer, after each use of the concrete storage tank, cleaning the concrete adhered to the concrete storage tank and the inlet and outlet is a daily maintenance work that must be carefully carried out. These include:

a．每次装料前用水冲洗进料口，使进料口在装料时保持湿润；
a. Flush the feed inlet with water before each loading to keep it wet during loading;
b．在装料的同时向随车自带的清洗用水水箱中注满水；
b. At the same time of loading, fill the water tank with water for cleaning;
c．装料后冲洗进料口，洗净进料口附近残留的混凝土；
c. Flush the feed inlet after loading, and clean the residual concrete near the feed inlet;
d．到工地卸料后，冲洗出料槽，然后向混凝土贮罐内加清洗用水30—40L；在车辆回程时保持混凝土贮罐正向慢速转动；
d. After unloading at the construction site, flush the discharge chute, and then add 30-40L of cleaning water to the concrete storage tank; Keep the concrete tank rotating slowly in the forward direction during the vehicle return;
e．下次装料前切记放掉混凝土贮罐内的污水；
e. Remember to drain the sewage in the concrete storage tank before the next loading;
f．每天收工时彻底清洗混凝土贮罐及进出料口周围，保证不粘有水泥及混凝土结块。
f. At the end of each day, thoroughly clean the concrete storage tank and around the inlet and outlet to ensure that there is no cement and concrete caking.
以上这些工作只要一次不认真进行，就会给以后的工作带来很大的麻烦。
If the above work is not carried out seriously once, it will bring great trouble to the future work.
以上就是为大家介绍的有 自动上料混凝土搅拌车的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务 //www.scritchies.com
The above is a detailed introduction to the automatic concrete mixer, and I hope it will be helpful to you. If you have any questions, please contact us. We will provide you with professional services //www.scritchies.com/