自动上料搅拌车集上料、搅拌为一体，节省人力物力，被广泛应用。自动上料搅拌车如有物料那么不能停止搅拌，防止物料凝固，有不少客户遇到过江南app官方网站下载安装苹果 在使用的过程中会出现搅拌轴停止转动的现象，出现这种情况一般都是什么原因造成的呢？下面小编为大家讲解搅拌轴出现停止转动这种情况的原因：
The automatic feeding mixer integrates feeding and mixing, saving manpower and material resources, and is widely used. If there are materials in the automatic feeding mixer, the mixing cannot be stopped to prevent the materials from solidifying. Many customers have encountered the phenomenon that the mixing shaft stops rotating during the use of the self feeding concrete mixer. What are the reasons for this? The following section explains why the mixing shaft stops rotating:
自上料搅拌车搅拌轴停止转动的原因及方法
Reasons and Solutions for Stopping Rotation of Mixing Shaft of Self feeding Mixer Truck
在生产过程中当出现混凝土自上料搅拌车搅拌轴停止转动或是转动有点缓慢都是不正常现象，如果出现这种情况停机检查，看看有没有出现下列三种情况。
During the production process, it is abnormal for the concrete to stop rotating from the mixing shaft of the loading mixer or rotate slowly. If this happens, stop the machine first to check whether the following three conditions occur.
1、电机传动皮带有没有出现松动的情况？
1. Is the motor drive belt loose?
自拌混凝土搅拌车电机传动皮带过松也能导致商品混凝土拌合机搅拌轴转动缓慢或者停止转动，电机传动皮带过松，导致传递的动力不足。
The loose motor drive belt of self mixing concrete mixer can also cause the mixing shaft of commercial concrete mixer to rotate slowly or stop rotating, and the loose motor drive belt can cause insufficient power transmission.

2、有没有严重超载？
2. Is there any serious overload?
自拌混凝土搅拌车搅拌轴如果超过正常工作负荷，会使搅拌轴转动缓慢，若负荷过大，就会导致搅拌轴停转或者是搅拌轴弯曲。
If the mixing shaft of self mixing concrete mixer exceeds the normal working load, the mixing shaft will rotate slowly. If the load is too large, the mixing shaft will stop or bend.
3、搅拌叶片或侧叶片与筒体内壁间有没有大的异物？
3. Is there any large foreign matter between the mixing blade or side blade and the inner wall of the cylinder?
出现这种情况也会使混凝土自动上料搅拌车搅拌轴停止转动或转动缓慢。搅拌叶片或侧叶片与罐内壁间有较大的异物也会导致搅拌轴停转，之所以能卡存异物，就是由于搅拌叶片或侧叶片与罐内壁间隙过大造成的，尤其是石子。
In this case, the mixing shaft of the automatic concrete feeding mixer will stop rotating or rotate slowly. Large foreign matters between the mixing blades or side blades and the inner wall of the tank will also cause the mixing shaft to stop. The reason why foreign matters can be stuck is that the clearance between the mixing blades or side blades and the inner wall of the tank is too large, especially stones.
以上就是为大家介绍的有关 江南体育下载地址的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务 //www.scritchies.com/
The above is a detailed introduction to the fully automatic self loading mixer, and I hope it will be helpful to you. If you have any questions, please contact us. We will provide you with our attitude //www.scritchies.com/