江南app平台官网 车水温过高怎么?

来源://www.scritchies.com日期:2020-05-04 发布人:admin
  搅拌车的水温很容易过高,如果温度过高则会影响设备的正常使用,下面我们来介绍一下江南app平台官网 车水温过高的方法:
  The water temperature of the mixer is very easy to be too high. If the temperature is too high, it will affect the normal use of the equipment. Let's introduce the solution to the high water temperature of the concrete mixer:
  一、冷却风扇不转,冷转风扇可能由温控开关控制;也可能由水温传感器控制。
  1、 If the cooling fan does not turn, it may be controlled by the temperature control switch or by the water temperature sensor.
  二、不能及时冷却
  2、 Unable to cool in time
  1.防冻液:要求一年四季都要加注防冻液。
  1. Antifreeze: it is required to add antifreeze all year round.
  2.水或蒸馏水:临时代用。3.水箱盖漏水。
  2. Water or distilled water: temporary substitute. 3. The water tank cover is leaking.
  三、水箱堵塞
  3、 Water tank blocked
  1.外部堵塞应用水或气将脏物除掉。
  1. The external blockage shall be removed with water or air.
  2.内部堵塞会影响冷却液的循环,同时会产生压力,这时会有两种结果,一种是水箱漏水,另一种是在高速行驶时水温特别高。
  2. Internal blockage will affect the circulation of coolant and generate pressure at the same time. At this time, there will be two results, one is water leakage in the water tank, the other is that the water temperature is particularly high when driving at high speed.
搅拌车
  四、水泵故障
  4、 Water pump failure
  1.叶轮打滑或卡死导致正时皮带断掉;
  1. Timing belt is broken due to impeller slipping or jamming;
  2.叶轮变形。
  2. The impeller is deformed.
  五、汽缸损蚀
  5、 Cylinder erosion
  1.燃烧室与水道冲,这时会从排水管排水或排白烟,造成水箱经常性缺水。
  1. When the combustion chamber flushes with the water channel, water will be drained from the drain pipe or white smoke will be discharged, resulting in frequent water shortage of the water tank.
  2.水道与油道冲(机油有水呈白色)。
  2. The water channel and oil channel are flushed (water in the engine oil is white).
  3.水道与水道冲,造成缸体散热不良,尤其在高速时影响更大。
  3. The water channel flushes with the water channel, resulting in poor heat dissipation of the cylinder block, especially at high speed.
  4.水道堵。
  4. The water channel is blocked.
  江南app平台官网 车水温过高的方法就介绍到这里了,水温一旦过高需要及时,否则容易对车辆造成损伤。
  The solution to the high water temperature of the concrete mixer is introduced here. Once the water temperature is too high, it needs to be solved in time, otherwise it is easy to cause damage to the vehicle.